2000W 2012 NEW single touch control Induction Cooker A6-1

1).Induction cooker, 2).With high power 3).And safety quality 4).With fuse 220V 50Hz 2000W

Induction Cooker

1).Induction cooker,AC 220-240V~50/60Hz 2000W

2).Intellect touch control board

3).Big 4-digital LED display,boil milk,cook rice,fry,fire pot are avaiable

4).Power shift,different power choice

5).Dampproof,protect insec, 1000 times lighting strike test is pass

6).Subscribe work for 24 hours,timer for 24 hours.

7).Electric energy inquiry automatic.

Specification

High efficiency and energy saving

Multi-ply protection function, more safe

Ten stages of fire adjustment to meet different cooking needs

Special design of energy saving, controlled by microcomputer

Convenient timer function.

Excellent detection system, when cooking with unsuitable pot(including unsuitable pot with unsuitable material, smaller size),the machine won’t heat

Automatic cooking function, the cooking fire, temperature and cooking procedure are adjusted by key-press

Working Principle

This induction cooker is based on the electromagnetic induction principle after power on, the magnetic field owing to the coil with current induce the bottom of the pan and heat the food.

Pan choose

In order to let the induction cooker to work under the best situation, it is better to use the matched pan or pot. If user uses other pan or pot, please chooses steel pan or pot with plain bottom and the diameter is 12~20cm with inducts magnet.

Suitable pans:

Iron pan with flat base and base diameter ranging between 12cm and 20cm

Unsuitable pans:

Any pans made of ceramic, glass, aluminum or cooper, or those with uneven base ,base diameter less than 12cm or over than 20cm

Phenonena	Check Points
When “ON/OFF” is pressed,the indicating lamp does not light	Check whether the power plug is inserted tight or not.And whether it is electrifiedCheck whether switch,socket,fuse and power cord is good or not.
The cooker won’t heat,”B-B” is heard or “E0” is displayed	Check whether pot is suitableCheck whether pot is put on the center of plate
The indicating lamp flashes or”E1” is displayed,but it won’t heat	Current voltage is lower than 160V,try again when voltage between 160V~270V.
The indicating lamp flashes or”E1” is displayed,but it won’t heat	Current voltage higher than 270V,try again when voltage between 165V~270V.
The indicating lamp flashes or”E2” is displayed,but it won’t heat	Inner of unit termperature is too high,please check motor fan is good working or spread exit is open or not.
The indicating lamp flashes or”E3” is displayed,but it won’t heat	Check the electricity power is suitable or not.
The indicating lamp flashes or”E5” is displayed,but it won’t heat	The pot is too hot,please wait till the pot is in normal temperature
The indicating lamp flashes or”E6” is displayed,but it won’t heat	Inside of pot no loading,please select fry or other function.

2000W 2012 NEW single touch control Induction Cooker A6-1